Dell PowerVault MD3860f Owner's Manual

Also see for PowerVault MD3860f: Deployment guide

Contents

Dell PowerVault MD3860f Owner's Manual Manual pdf 21 page image

3Installing and removing systemcomponentsRecommended ToolsYou may need the following items to perform the procedures in this section:• #2 Phillips screwdriver• T8 and T15 Torx screwdrivers• Wrist grounding strap connected to groundRemoving And Installing The Front BezelInstalling The Front BezelYou must install the front bezel on the system to secure the disk drawers against accidental removal.1. Align the slots on the back of the bezel with the guide pins on the front of the chassis.2. Push the bezel toward the chassis until the bezel is seated properly and the release latches snap intoplace.Figure 12. Removing and Installing the Front Bezel1. release latches (2) 2. front bezel21