Dell PowerVault NX1950 Installation Manual

Also see for PowerVault NX1950: Deployment guide Important information Getting started Deployment guide Installation and troubleshooting guide

Contents

12 Installation GuideAccessing the SAC Command PromptSAC is the primary EMS CLI environment hosted by Windows UnifiedData Storage Server 2003 operating systems. It is separate from the CLIenvironment and provides different functionality.SAC is available immediately after you turn on the system. You can useSAC to manage the server during normal system operation and to initiatemost of the Windows Unified Data Storage Server 2003 operating systemcomponents. You can also use the SAC when the system is in Safe Modeand during GUI-mode setup. When EMS is enabled, SAC remains activeas long as the kernel is running.You can access SAC using a serial cable between the storage server anda portable system, along with a terminal emulation program such asHyperTerminal, to connect to the server.NOTE: To access EMS remotely, ensure that you are using compatible clientsoftware for terminal emulation. For more information, see "Selecting clientterminal software for Emergency Management Services" on the Microsoftwebsite at http://go.microsoft.com/fwlink/?LinkId=66418.To access the SAC command prompt:1 Start the terminal emulation program and connect to the serial port.2 Open Windows Unified Data Storage Server.3 After EMS starts, at the SAC prompt, type cmd and press to create a command prompt window.4 To switch the channel window to view the output of the commandprompt, type ch -sn cmd0001 and press .5 Log on as Administrator.NOTE: The default password for your system is storageserver.For more information about using SAC, see "Using EmergencyManagement Services" on the Microsoft website athttp://go.microsoft.com/fwlink/?LinkId=66415 or see Windows UnifiedData Storage Server 2003 Help.