20 Connecting to the PowerVault NX1950 Storage System InitiallyNOTE: You are not required to log on as an administrator to establish abrowser-based connection but you must to log on as an administrator tomanage the storage server. The default administrator password forWindows Unified Data Storage Server 2003 is storageserver.NOTE: If JRE is not installed correctly, the following message may bedisplayed: Additional plug-ins are required to display all the media on this page.For information about installing JRE on a system running an operating systemother than the Windows family, see "Installation Instructions" on theMicrosoft website at http://go.microsoft.com/fwlink/?LinkId=70026.Remote Desktop for AdministrationRemote administration is accomplished using Remote Desktop forAdministration (formerly known as Terminal Services in RemoteAdministration mode). You can use Remote Desktop for Administrationto access a system from any other system on the same network. Based onTerminal Services technology, Remote Desktop for Administration isspecifically designed for server management.You do not need to purchase special licenses for client systems that access theserver’s Remote Desktop for Administration. It is not necessary to installTerminal Server Licensing when using Remote Desktop for Administration.You can use Remote Desktop for Administration to log on to the serverremotely with any of the following:• Remote Desktop Connection• Remote Web Administration• Windows Server Remote Administration appletFor more information, see "Remote Desktop for Administration" on theMicrosoft website at http://go.microsoft.com/fwlink/?LinkId=69056or see Windows Unified Data Storage Server 2003 Help.NOTE: For secure connections, it is recommended that you obtain a certificatefor the server and use the HTTPS connections to connect to Windows UnifiedData Storage Server 2003.NOTE: The default administrator password for Windows Unified Data StorageServer 2003 is storageserver.