48 Using the System Setup Program and UEFI Boot ManagerIntegrated Devices ScreenHard-Disk DriveSequenceDetermines the order in which the BIOS attempts toboot from hard drives in the system during systemstartup.USB Flash DriveEmulation Type(Auto default)Determines the emulation type for a USB flash drive.Hard disk allows the USB flash drive to act as a harddrive. Floppy allows the USB flash drive to act as aremovable diskette drive. Auto automatically chooses anemulation type.Boot Sequence Retry(Disabled default)If this field is enabled and the system has failed to boot,the system reattempts to boot after 30 seconds.Option DescriptionIntegrated SASController(Enabled default)Enables or disables the integrated storage controller.User Accessible USBPorts(All Ports On default)Enables or disables the user-accessible USB ports. Optionsare All Ports On, Only Back Ports On, and All Ports Off.Internal USB Port 1(On default)Enables or disables the internal USB port.Internal USB Port 2(On default)Enables or disables the internal USB port.Embedded NIC1 andNIC2(Enabled default)Enables or disables the OS interface of the two embeddedNICs. (The NICs may also be accessed through thesystem’s management controller.)Embedded Gb NICx(NIC1 default: Enabledwith PXE;Other NICs: Enabled)Enables or disables the embedded NICs. Options areEnabled, Enabled with PXE, and Enabled with iSCSIBoot. PXE support allows the system to boot from thenetwork.MAC Address Displays the MAC address for the NIC.Option Description
