58 Using the System Setup Program and UEFI Boot ManagerWhen Password Status is Locked, you must type the password and press when prompted at reboot.If an incorrect system password is entered, the system displays a message andprompts you to re-enter your password. You have three attempts to enter thecorrect password. After the third unsuccessful attempt, the system displays anerror message that the system has halted and must be shut down manuallyusing the power button.Even after you shut down and restart the system, the error message continuesto be displayed until the correct password is entered.NOTE: You can use the Password Status option in conjunction with the SystemPassword and Setup Password options to protect your system from unauthorizedchanges.Disabling the System PasswordIf the system password is already set, you can disable it by typing the passwordduring POST and pressing or you can enter the systemsetup and press twice when you are in the system password menu.Changing an Existing System Password1 Enter the System Setup program by pressing during POST.2 Select the System Security screen.3 Verify that the Password Status is Unlocked.4 Type the new system password in the two password fields.The System Password field changes to Not Enabled if the password wasdeleted.Using the Setup PasswordAssigning a Setup PasswordYou can assign a setup password only when the Setup Password is NotEnabled. To assign a setup password, highlight the Setup Password optionand press the <+> or <–> key. The system prompts you to enter andverify the password.
