Dell Precision M2400 Service Manual

Also see for Latitude E6400 ATG: Manual How-to guide How-to guide System Board Replacement How-to guide

Contents

Dell Precision M2400 Service Manual Manual pdf 62 page image

Back to Contents PageHinge CoversDell™ Latitude™ E6400 and E6400 ATG andMobile Workstation Precision™ M2400 Service ManualRemoving the Hinge CoversReplacing the Hinge CoversRemoving the Hinge CoversThe hinge covers are not interchangeable; the left one covers the DisplayPort connector and the right one covers the RJ-45 network connector.1. Follow the procedures in Before Working on Your Computer.2. Remove the bottom of the base assembly (see Removing the Bottom of the Base Assembly).3. Remove the M2.5 x 5-mm screw from each hinge cover.4. Slide each hinge cover forward and lift to remove it.Replacing the Hinge Covers1. Slide the left hinge cover over the DisplayPort connector and slide the right hinge cover over the RJ-45 network connector.2. Replace the M2.5x5-mm screw in each hinge cover.3. Replace the bottom of the base assembly (see Replacing the Bottom of the Base Assembly).4. Follow the procedures in After Working on Your Computer.Back to Contents PageCAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.1 M2.5 x 5-mm screws (2) 2 hinge covers