l To double-click an object, position the cursor on the object and tap twice on the touch pad or use your thumb to press the left touch-pad button twice.You can also use the track stick to move the cursor. Press the track stick left, right, up, or down to change the direction of the cursor on the display. Use thetrack stick and track stick buttons as you would use a mouse.Customizing the Touch Pad and Track StickYou can use the Mouse Properties window to disable the touch pad and track stick or adjust their settings.1. Open the Control Panel, click Printers and Other Hardware, and then click Mouse.2. In the Mouse Properties window:l Click the Device Select tab to disable the touch pad and track stick.l Click the Pointer tab to adjust touch pad and track stick settings.3. Click OK to save the settings and close the window.Changing the Track Stick CapYou can replace your track stick cap if it wears down from prolonged use or if you prefer a different color. You can purchase additional caps by visiting the Dellwebsite at www.dell.com.1. Pull the cap off the track stick.2. Align the new cap over the square track-stick post and gently press the cap down onto the post.3. Test the track stick to ensure that the cap is seated properly.Back to Contents PageNOTICE: The track stick cap can damage the display if it is not properly seated on the post.
