Advanced Features 611 Click the Start button and point to Programs→ Intel(R) Matrix StorageManager→ Intel Matrix Storage Console to launch the Intel StorageUtility.2 Right-click the available hard drive to which you want to rebuild the RAIDlevel 1 or 5 volume, and click Rebuild to this Disk.3 You can use your computer while the computer is rebuilding the RAIDlevel 1 or 5 volume.Configuring Your Computer for RAID Using the Intel® RAID Option ROMUtilityNOTICE: You will lose any data on your hard drives when you create a RAIDconfiguration using the following procedure. Back up data that you want to keepbefore continuing.NOTICE: Use the following procedure only if you are reinstalling your operatingsystem. Do not use the following procedure to migrate an existing storageconfiguration to RAID level 0 configuration.Creating a RAID Level 0 ConfigurationNOTICE: You will lose any data on your hard drives when you create a RAIDconfiguration using the following procedure. Back up data that you want to keepbefore continuing.1 Set your computer to RAID-enabled mode (see "Setting Your Computer toRAID-Enabled Mode" on page 53).2 Press when you are prompted to enter the Intel RAID OptionROM utility.3 Press the up- and down-arrow keys to highlight Create RAID Volume, andpress .4 Enter a RAID volume name or accept the default, and press .5 Press the up- and down-arrow keys to select RAID0(Stripe), and press.6 If more than two hard drives are available, press the up- and down-arrowkeys and spacebar to select the two or three drives that you want to use tomake up your configuration, and then press .
