NOTE: The utility partition is not protected from debug routines or the FDISK utility.System Setup OptionsNOTE: Depending on the computer and its installed devices, the items listed in thissection may or may not appear.• To make changes to the BIOS setup, select one of the below options, update theinformation and click Apply.• To revert to the factory settings, click Load Defaults.• To close the window, click Exit.GeneralSystem Board Displays the following information:• System Information: Displays BIOS Version, Service Tag,Express Service Code, Asset Tag, Manufacture Date, andthe Ownership Date.• Memory Information: Displays Memory Installed, MemorySpeed, Number of Active Channels, Memory Technology,DIMM 1 Size, DIMM 2 Size, DIMM 3 Size, DIMM 4 Size,DIMM 5 Size, DIMM 6 Size, DIMM 7 Size , DIMM 8 Size ,DIMM 9 Size ,DIMM 10 Size, DIMM 11 Size and DIMM 12Size.• Processor Information: Displays processor information foreach CPU. The following fields are common for CPU 1 andCPU 2: Processor Type, Processor Speed, QPI Speed,Processor L2 Cache, Processor L3 Cache, Processor ID,Microcode Version, Multi Core Capable, HT Capable and64-Bit Technology.• Slot Information: Displays SLOT1, SLOT1, SLOT2, SLOT3,SLOT4, SLOT5, SLOT6, and SLOT7.Date/Time Displays current date and time settings. Changes to the systemdate and time take effect immediately.Boot Sequence Specifies the order in which the computer attempts to find anoperating system from the devices specified in this list.• USB Floppy Drive• #2300 ID00 LUN0 FUJITSU MBE2147RC• #2300 ID01 LUN0 FUJITSU MBE2147RC• CD/DVD/CD-RW Drive• Onboard or USB CD-ROM Drive69