Dell Precision Workstation 450 Service Manual

Also see for Precision Workstation 450: System information guide System information guide Setup and quick reference guide Setup and quick reference guide Setup and quick reference guide

Dell Precision Workstation 450 Service Manual Manual pdf 67 page image

Back to Contents PageSystem BoardDell Precision™ Workstation 650 and Dell Precision Workstation 450 Service ManualRemoving the System BoardReplacing the System BoardRemoving the System Board1. Remove any components that restrict access to the system board.2. Disconnect all cables from the system board.3. Before you remove the existing system board assembly, visually compare the replacement system board to the existing system board to make surethat you have the correct part.4. Remove the system board screw.5. Pull up on the two tabs, slide the system board assembly toward the front of the computer, and then lift the asembly up and away.6. Place the system board assembly that you just removed next to the replacement system board.Replacing the System Board1. Transfer components from the existing system board to the replacement system board:a. Remove the memory modules and install them on the replacement board.b. Remove the heat-sink assembly and microprocessor from the existing system board and transfer them to the replacement system board.2. Configure the settings of the replacement system board.3. Set the jumpers on the replacement system board so they are identical to the ones on the existing board.4. Orient the replacement board by aligning the notches on the bottom of the board with the tabs on the computer.CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.NOTICE: The system board and metal tray are connected and are removed as one piece.1 system board screw2 tab3 tabCAUTION: The microprocessor package and heat-sink assembly can get hot. To avoid burns, ensure that the package and assembly have hadsufficient time to cool before you touch them.NOTE: Some components and connectors on the replacement system board may be in different locations than the corresponding connectors on theexisting system board.

/ 68

Related manuals for Dell Precision Workstation 450