Dell Precision Workstation 450 User Manual

Also see for Precision Workstation 450: System information guide System information guide Setup and quick reference guide Setup and quick reference guide Setup and quick reference guide

Contents

Dell Precision Workstation 450 User Manual Manual pdf 148 page image

Video and Monitor ProblemsFill out the Diagnostics Checklist as you complete these checks.If the screen is blankIf the screen is difficult to readBack to Contents PageReseat the Memory Modules —1. Turn off the computer and devices, disconnect them from electrical outlets, wait 10 to 20 seconds, and then open the computer cover.2. Remove and replace the memory module(s).3. Close the computer cover, reconnect the computer and devices to electrical outlets, and turn them on.4. If the RAM count displayed does not correctly match the actual amount of memory installed in the computer, contact Dell.NOTE: See the monitor documentation for troubleshooting procedures.Check the monitor power light — If the power light is off, firmly press the button to ensure that the monitor is turned on. If the power lightis lit or blinking, the monitor has power. If the power light is blinking, press a key on the keyboard or move the mouse.Check the monitor cable connection — Check the connector for bent or broken pins. (It is normal for monitor cable connectors to havemissing pins.)Test the electrical outlet — Ensure that the electrical outlet is working by testing it with another device, such as a lamp.Swap the power cables — Swap the computer and monitor power cables to determine if the power cable is defective.Test the video extension cable (if used) — If you are using a video extension cable and removing the cable solves the problem, the cable isdefective.Test another monitor — If another monitor is available, connect it to the computer.Check the diagnostic lights — See Diagnostic Lights.Check the card setting — Enter system setup and ensure that Primary Video Controller under the Integrated Devices option is setcorrectly. For an AGP card, set Primary Video Controller to AGP. For a PCI card, set Primary Video Controller to Auto. Exit system setupand restart the computer.Run the Dell Diagnostics — If any tests fail, contact Dell.Check the monitor settings — See the monitor documentation for instructions on adjusting the contrast and brightness, demagnetizing(degaussing) the monitor, and running the monitor self-test.Move the subwoofer away from the monitor — If your speaker system includes a subwoofer, ensure that the subwoofer is at least 60 cm(2 ft) away from the monitor.Move the monitor away from external power sources — Fans, fluorescent lights, halogen lamps, and other electrical devices can cause thescreen image to appear "shaky." Turn off nearby devices to check for interference.Adjust the Windows® display settings —Windows XP1. Click the Start button, and then click Control Panel.2. Click Appearance and Themes.3. Click Display, and then click the Settings tab.4. Try different settings for Screen resolution and Color quality.Windows 20001. Click the Start button, point to Settings, and then click Control Panel.2. Double-click the Display icon, and then click the Settings tab.3. Try different settings for Screen area or Desktop area.Restore the recommended settings — Restore the original resolution and refresh rate settings.Restore the recommended settings — Restore the original resolution and refresh rate settings. See the Tell Me How help file for instructions.To access help files, see page 4.