24 | Operating the MonitorOperating the MonitorPower On the MonitorUse the Power button to turn On the monitor.Power Off the MonitorWhen the input source is set to wireless,• a short press (< 3 seconds) on the Power button will put the monitor intostandby mode. During standby mode, the white LED indicator on the Powerbutton blinks slowly.• a long press on the Power button will put the monitor into power off mode.When the input source is set to HDMI,• a press on the Power button will put the monitor power off mode.NOTE: If the HDMI cable is disconnected from the HDMI port, or your system is inthe standby mode, the Power button blinks white indicating that the monitor hasbeen in power-save mode.
