|
Configure Data Center Bridging (DCB) (optional)15 Dell EMC Networking S4148-ON and S4128-ON Switch Configuration Guide for Dell EMC SC Series SANs | SCG37043.11 Apply policies and VLAN ID to all switch edge portsOS10(config)# interface range ethernet 1/1/1-1/1/54OS10(conf-range-eth1/1/1-1/1/54)# switchport mode trunkOS10(conf-range-eth1/1/1-1/1/54)# switchport trunk allowed vlan OS10(conf-range-eth1/1/1-1/1/54)# service-policy input type network-qos map-name>OS10(conf-range-eth1/1/1-1/1/54)# service-policy output type queuing policy-name>OS10(conf-range-eth1/1/1-1/1/54)# ets mode onOS10(conf-range-eth1/1/1-1/1/54)# qos-map traffic-class OS10(conf-range-eth1/1/1-1/1/54)# priority-flow-control mode onOS10(conf-range-eth1/1/1-1/1/54)# exitOS10(config)#3.12 iSCSI enableOS10(config)# iscsi enableOS10(config)# iscsi session-monitoring enableOS10(config)# exit3.13 Save configurationOS10# copy running-configuration startup-configuration3.14 Show commands to verify DCBx, ETS, and PFC status on individualportsOS10# show lldp dcbx interface ethernet 1/1/OS10# show lldp dcbx interface ethernet 1/1/ pfc detailOS10# show lldp dcbx interface ethernet 1/1/ ets detail3.15 Configure additional switchesRepeat the commands from section 3 to configure DCB on additional switches. PreviousNext |