Dell S4820T Installation Manual

Also see for S4820T: Manual Configuration guide Configuration guide

Contents

Dell S4820T Installation Manual Manual pdf 20 page image

Installing ReadyRails — Tool-less MethodUse this installation method for four-post square hole or unthreaded round hole.1. With the ReadyRails flange ears facing outward, place one rail between the left and right verticalposts. Align and seat the rear flange rail pegs in the rear vertical post flange. In the following figure,item 3 and its extraction shows how the pegs appear in both the square and unthreaded round holes.Figure 4. Tool-less Configuration2. Align and seat the front flange pegs in the holes on the front side of the vertical post, as shown initem 1 in the figure.3. Align and seat the rear flange pegs in the holes on the rear side of the vertical post, as shown in item2 in the figure.4. Repeat this procedure for the second rail.5. To remove each rail, pull on the latch release button on each flange ear and unseat each rail, asshown in item 4 in the figure.20 Install the Hardware