Figure 17. Removing a Cooling Fan Module1. Cooling fan module 2. Release tab2. Rotate the replacement cooling fan module so that the release tab and handle are on the right side.3. Slide the replacement cooling fan module into the chassis until it is fully seated and the release tabclicks into place.NOTE: Allow several seconds for the enclosure to recognize the cooling fan module anddetermine its status. When the cooling fan is functioning properly, the Module OK LED turnsgreen and the Battery and Fan fault LEDs are off. In addition, the cooling fan status indicatorturns green in the Dell Storage Client.4. In the Dell Storage Client, make sure that the replacement cooling fan module is recognized andshown as up and running.Next stepsUse SupportAssist to send diagnostic data to Dell Technical Support.28 Replacing SCv2080 Storage System Components