14 | About your monitorVESAmodesHorizontal sync Vertical sync Video PowerindicatorPowerconsumptionPower management modesIf you have VESA's DPM compliance graphic cards or software installed on yourcomputer, the monitor can automatically reduce its power consumption when not inuse. This is referred to as power save mode*. If the computer detects input from thekeyboard, mouse or other input devices, the monitor automatically resumesfunctioning. The following table shows the power consumption and signaling of thisautomatic power saving feature.NormaloperationActive Active Active White 20 W (maximum)17 W (typical)modeInactive Inactive Blanked White(Glowing )Less than 0.5 W- - - Off Less than 0.3 WEnergy star Power consumptionPON 15.95 WETEC 50.59 kWhSE2219H/SE2219HXNOTE:PON: Power consumption of on mode as defined in Energy Star.E TEC: Total energy consumption in kWh as defined in Energy Star.This document is informational only and reflects laboratory performance. Your product mayperform differently, depending on the software, components and peripherals you orderedand shall have no obligation to update such information. Accordingly, the customer shouldnot rely upon this information in making decisions about electrical tolerances or otherwise.No warranty as to accuracy or completeness is expressed or implied.*Zero power consumption in off mode can only be achieved by disconnecting thepower cable from the monitor.