Dell Studio 1435 Service Manual

Also see for Studio 1435: User guide Setup guide

Back to Contents PageAudio BoardDell Studio™ 1435 Service ManualRemoving the Audio BoardReplacing the Audio BoardRemoving the Audio Board1. Follow the instructions in Before You Begin.2. Follow the instructions in Removing the Palm Rest.3. Remove the two screws that secure the audio board.4. Lift the audio board out of the computer base.Replacing the Audio Board1. Place the audio board in the computer base and replace the two screws that secure it.2. Follow the instructions in Replacing the Palm Rest.Back to Contents PageCAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (suchas the back panel) on the computer.1 screw (2) 2 audio boardNOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result indamage to the computer.