Dell Studio 1450 Service Manual

Also see for Studio 1457: User guide Setup guide Service manual

Dell Studio 1450 Service Manual Manual pdf 45 page image

3. Replace the five screws that secure the system board to the computer base.4. Connect the following cables to their corresponding connectors on the system board:l Fan cablel AC adapter cablel WWAN module cablel I/O board cablel Network cable5. Replace the optical drive (see Replacing the Optical Drive).6. Replace the speaker module (see Replacing the Speaker Module).7. Replace the palm rest (see Replacing the Palm Rest).8. Replace the keyboard (see Replacing the Keyboard).9. Connect the camera cable to the connector on the system board.10. Replace the memory modules (see Replacing the Memory Module(s)).11. Replace the hard drive (see Replacing the Hard Drive).12. Replace the Mini-Cards, if applicable (see Replacing the Mini-Card).13. Replace the base cover (see Replacing the Base Cover).14. Replace the battery (see Replacing the Battery).15. Replace any installed cards from the ExpressCard slot or 8-in-1 Media Card Reader.16. Turn on the computer.17. Enter the service tag (see Entering the Service Tag in the BIOS).Entering the Service Tag in the BIOS1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.2. Turn on the computer.3. Press during POST to enter the system setup program.4. Navigate to the security tab and enter the service tag in the Set Service Tag field.Back to Contents PageCAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so mayresult in damage to the computer.NOTE: After you have replaced the system board, enter the computer Service Tag into the BIOS of the replacement system board.

/ 47

Related manuals for Dell Studio 1457