Dell Studio 1535 Service Manual

Also see for 1537 - Studio Core 2 Duo T6400 2.0GHz 4GB 320GB: User guide Setup guide Setup guide Quick reference guide Setting Up Your Computer

Dell Studio 1535 Service Manual Manual pdf 23 page image

Back to Contents PageHard DriveDell™ Studio 1535/1536 Service ManualRemoving the Hard Drive1. Follow the procedures in Before You Begin.2. Turn the computer over and remove the base cover (see Removing the Base Cover).3. Remove the four screws securing the hard drive assembly to the computer.4. Pull the hard drive cable pull-tab to disconnect the cable from the system board connector.5. Pull on the hard drive pull-tab to lift the hard drive assembly from the bay.6. Remove the four M3 x 3-mm screws securing the hard drive cage to the hard drive.7. Lift the hard drive cage off the hard drive.CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.CAUTION: Do not touch the metal housing of the hard drive if you remove the hard drive from the computer while the drive is hot.NOTICE: To prevent data loss, turn off your computer before removing the hard drive. Do not remove the hard drive while the computer is on or in theSleep state.NOTICE: Hard drives are extremely fragile. Exercise care when handling the hard drive.NOTE: Dell does not guarantee compatibility or provide support for hard drives obtained from sources other than Dell.1 hard drive cable pull-tab 2 hard drive pull-tab3 hard drive assembly