Dell Studio Desktop Service Manual

Also see for 540 - USB Photo Printer 540: User guide Owner's manual Setup guide Specification User guide

Contents

Replace the card retention bracket ensuring that:l The guide clamp is aligned with the guide notch.l The tops of all cards and filler brackets are flush with the alignment bar.l The notch in the top of the card or filler bracket fits around the alignment guide.Configuring Your Computer After Removing or Installing a PCI/PCI Express CardBack to Contents Page1 alignment guide 2 filler bracket3 alignment bar 4 card retention bracket5 guide clamps (2) 6 guide notchs (2)NOTE: For information on location of connectors, see the Setup Guide. For information on installing drivers and software for your card, see thedocumentation that shipped with the card.Installed RemovedSound Card 1. Enter system setup (see System Setup).2. Go to Integrated Peripherals and select Onboard Audio Controller, and thenchange the setting to Disabled.3. Connect the external audio devices to the sound card's connectors.1. Enter system setup (see System Setup).2. Go to Integrated Peripherals and select Onboard Audio Controllerchange the setting to Enabled.3. Connect the external audio devices to the computer's back panel connectorNetworkCard1. Enter system setup (see System Setup).2. Go to Integrated Peripherals and select Onboard LAN Controller, and thenchange the setting to Disabled.3. Connect the network cable to the network card's connector.1. Enter system setup (see System Setup).2. Go to Integrated Peripherals and select Onboard LAN Controllerchange the setting to Enabled.3. Connect the network cable to the integrated network connector.