Dell Studio Hybrid Service Manual
                                          | |
Contents
|
1. Connect the RF receiver cable to the back panel.2. Spread the side tabs slightly to attach the back panel to the chassis.3. Ensure that the tabs and the latches are positioned on the frame.4. Connect the fan cable to the connector SYS_FAN1 on the system board, the black antenna cable to the WLAN card, and the flex-cable to the back I/Oboard.5. Replace the drive cage (see Installing the Drive Cage).6. Replace the computer cover (see Installing the Computer Cover).Back to Contents PageNOTICE: Ensure that you remove all cables out of the way before replacing the panel. |
Related manuals for Dell Studio Hybrid
Dell Studio 540 Service Manual
Dell Studio Slim Service Manual
Dell Studio Desktop Service Manual
Dell Studio One 19 Service Manual
Dell Studio Hybrid DCSEA Setup Manual
Dell Studio XPS 9100 Service Manual
Dell Studio XPS 8100 Service Manual
Dell Studio XPS 7100 Service Manual
Dell Studio One 19/1909 Service Manual
Dell Studio XPS 435 MT Service Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine