Dell Studio Hybrid Service Manual

Back to Contents PageReplacing the Bottom Logo AssemblyDell™ Studio Hybrid Service ManualRemoving the Bottom Logo AssemblyRemoving the Bottom Logo LEDInstalling the Bottom Logo LEDInstalling the Bottom Logo AssemblyRemoving the Bottom Logo Assembly1. Follow the procedures in Before You Begin.2. Remove the computer cover (see Removing the Computer Cover).3. Remove the drive cage (see Removing the Drive Cage).4. Remove the processor heat sink (see Removing the Heat Sink).5. Remove the front I/O panel (see Removing the Front I/O Panel).6. Remove the back panel (see Removing the Back Panel).7. Remove the system board (see Removing the System Board).8. Remove the screw that secures the logo bracket to the chassis.9. Slide and lift the logo bracket away from the chassis.Removing the Bottom Logo LED1. Pry the LED away from the chassis using a screwdriver.2. Lift the LED away from the chassis.CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.