Dell UltraSharpUP3216Q User Manual

Dell UltraSharpUP3216Q User Manual Manual pdf 22 page image

22  Setting Up the MonitorSetting Up the MonitorAttaching the StandNOTE: The stand is detached from the monitor when it is shipped from thefactory.NOTE: This is applicable for a monitor with a stand. When any other standis bought, please refer to the respective stand setup guide for the set upinstructions.To attach the monitor stand:1. Remove the cover and place the monitor on it.2. Fit the two tabs on the upper part of the stand to the groove on theback of the monitor.3. Press the stand till it snaps into its place.Connecting Your MonitorWARNING: Before you begin any of the procedures in this section, followthe Safety Instructions.To connect your monitor to the computer:1. Turn Off your computer and disconnect the power cable.2. Connect the black HDMI cable or the DP (DisplayPort) cable to thecorresponding video port on the back of your computer.Do not use all the cables on the same computer.Use all of the cables only when they are connected to differentcomputers with appropriate video systems.