Replacing the Display Cable1. Connect the display cable to the connector on the back of the display panel.2. Replace the display panel (see Replacing the Display Cable).3. Connect the camera/microphone cable to the connector on the camera/microphone assembly.4. Replace the camera and microphone assembly (see Replacing the Camera and Microphone Assembly).5. Replace the two M2 x 5-mm screws in the hinges.6. Replace the display inverter (see Replacing the Display Inverter).7. Replace the display bezel (see Replacing the Display Bezel).8. Replace the display assembly (see Replacing the Display Assembly).9. Replace the keyboard (see Replacing the Keyboard).10. Replace the hinge cover (see Replacing the Hinge Cover).11. Replace the WLAN card (see Replacing a WLAN Card).12. Replace the hard drive (see Replacing the Hard Drive).Camera and Microphone AssemblyRemoving the Camera and Microphone Assembly1. Follow the instructions in Before Working on Your Computer.2. Remove the hard drive (see Removing the Hard Drive).3. Remove the WLAN card (see Removing a WLAN Card).4. Remove the hinge cover (see Removing the Hinge Cover).1 display panel 2 display cable connector3 display cableCAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.NOTE: This procedure assumes that you have completed the removal procedure first.CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.