Dell Vostro 15 5510 Service Manual

Also see for P106F: Setup and specifications Quick start Service manual Setup and specifications Service manual

About this taskThe following images indicate the location of the heatsink and provide a visual representation of the removal procedure.Steps1. In reverse sequential order (as indicated on the heat sink), loosen the four captive screws that secure the heat sink to thesystem board.2. Lift the heat sink off the system board.Installing the heatsinkPrerequisitesIf you are replacing a component, remove the existing component before performing the installation procedure.CAUTION: Incorrect alignment of the heat sink can damage the system board and processor.NOTE: If either the system board or the heat sink is replaced, use the thermal pad/paste provided in the kit to ensure thatthermal conductivity is achieved.About this taskThe following image indicates the location of the heatsink and provides a visual representation of the installation procedure.Removing and installing components 39