Dell Vostro 1500 Service Manual

Also see for Inspiron 1520: Setup & features Owner's manual Quick setup Setting Up Your Computer Setting Up Your Computer

Dell Vostro 1500 Service Manual Manual pdf 50 page image

Replacing a Mini CardWLAN Card1. Insert the WLAN card connector at a 45-degree angle into the system board connector labeled "WLAN".2. Press the other end of the WLAN card down into the securing tabs until the card clicks into place.3. Connect the appropriate antenna cables to the WLAN card you are installing:If the WLAN card has two triangles on the label (white and black), connect the white antenna cable to the connector labeled "main" (white triangle), andconnect the black antenna cable to the connector labeled "aux" (black triangle).If the WLAN card has three triangles on the label (white, black, and gray), connect the white antenna cable to the white triangle, connect the blackantenna cable to the black triangle, and connect the gray antenna cable to the gray triangle.4. Secure unused antenna cables in the protective mylar sleeve.5. Replace the cover and tighten the captive screws.Mobile Broadband or WWAN Card1. Insert the WWAN card connector at a 45-degree angle into the system board connector labeled "WWAN".2. Press the other end of the WWAN card down into the securing tabs until the card clicks into place.3. Connect the black antenna cable with a gray stripe to the connector labeled "aux" (black triangle) and connect the white antenna cable with a graystripe to the connector labeled "main" (white triangle).4. Secure unused antenna cables in the protective mylar sleeve.5. Replace the cover and tighten the captive screws.1 WPAN card 2 metal securing tabs (2)NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, andrealign the card.NOTICE: To avoid damage to the WLAN card, never place cables under the card.NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, andrealign the card.NOTICE: To avoid damage to the WWAN card, never place cables under the card.