178 AppendixBoot SequenceThis feature allows you to change the boot sequence for devices.Option Settings• Diskette Drive — The computer attempts to boot from the floppy drive. Ifthe floppy disk in the drive is not bootable, if no floppy disk is in the drive,or if there is no floppy drive installed in the computer, the computergenerates an error message.• Hard Drive — The computer attempts to boot from the primary harddrive. If no operating system is on the drive, the computer generates anerror message.• CD Drive — The computer attempts to boot from the CD drive. If no CDis in the drive, or if the CD has no operating system, the computergenerates an error message.Onboard LAN BootROMEnabled or Disabled (Disabled by default)SATA Mode IDE; RAID; AHCI (IDE by default)Power Management SetupACPI Suspend Type S1(POS); S3(STR) (S3(STR) by default)Quick Resume Disabled; Enabled (Disabled by default)Remote Wake Up On; Off (On by default)USB KB Wake-UpFrom S3Enabled; Disabled (Disabled by default)Auto Power On Enabled; Disabled (Disabled by default)Auto Power On Date 0Auto Power On Time 0:00:00AC Recovery Off; On; Former-Sts (Off by default)
