Troubleshooting Tools 87Starting the Dell Diagnostics From the Drivers and Utilities Media1 Insert the Drivers and Utilities media.2 Shut down and restart the computer.When the DELL logo appears, press immediately.NOTE: If you wait too long and the operating system logo appears, continueto wait until you see the Microsoft Windows desktop; then, shut down yourcomputer and try again.NOTE: The next steps change the boot sequence for one time only. On thenext startup, the computer boots according to the devices specified in thesystem setup program.3 When the boot device list appears, highlight CD/DVD/CD-RW and press.4 Select the Boot from CD-ROM option from the menu that appears andpress .5 Type 1 to start the CD menu and press to proceed.6 Select Run the 32 Bit Dell Diagnostics from the numbered list. If multipleversions are listed, select the version appropriate for your computer.7 When the Dell Diagnostics Main Menu appears, select the test you wantto run.Dell Diagnostics Main Menu1 After the Dell Diagnostics loads and the Main Menu screen appears, clickthe button for the option you want.NOTE: It is recommended that you select Test System to run a complete test onyour computer.Option FunctionTest Memory Runs the stand-alone memory testTest System Runs System DiagnosticsExit Exits the Diagnostics
