Drives 738 Check all cables to ensure that they are properly connected and firmlyseated.9 For the Vostro 220s, replace the chassis support bracket (see "Replacing theChassis Support Bracket" on page 57).10 Follow the procedure in "After Working on Your Computer" on page 45.11 When you restart your computer, check the drive configurationinformation in the system setup program:a Enter the system setup program (see "System Setup Program" onpage 129 for instructions).b In the Drives section of the system setup program, under Drive 0through 3, set the drive setting to the correct configuration.12 See the documentation that came with the drive for instructions oninstalling any software required for drive operation.Media Card ReaderCAUTION: Before working inside your computer, read the safety information thatshipped with your computer. For additional safety best practices information, seethe Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.CAUTION: To guard against electrical shock, always unplug your computer fromthe electrical outlet before removing the cover.Removing a Media Card Reader1 Follow the procedures in "Before Working on Your Computer" on page 35.2 Remove the computer cover (see "Removing the Computer Cover" onpage 47).3 Remove the bezel (see "Removing the Bezel" on page 51).Downloaded from www.Manualslib.com manuals search engine
