Keys Navigation Allows you to select a value in the selected field (if applicable) or follow the link in the field.Spacebar Expands or collapses a drop‐down list, if applicable. Moves to the next focus area.NOTE: For the standard graphics browser only. Moves to the previous page till you view the main screen. Pressing in the main screendisplays a message that prompts you to save any unsaved changes and restarts the system. Displays the System Setup help file.System Setup OverviewSystem Setup allows you to:• change the system configuration information after you add, change, or remove any hardware in your computer.• set or change a user-selectable option such as the user password.• read the current amount of memory or set the type of hard drive installed.Before you use System Setup, it is recommended that you write down the System Setup screen information for futurereference.CAUTION: Unless you are an expert computer user, do not change the settings for this program. Certain changescan cause your computer to work incorrectly.Enter System Setup1. Turn on (or restart) your computer.2. When the blue DELL logo is displayed, you must watch for the F2 prompt to appear.3. Once the F2 prompt appears, press immediately.NOTE: The F2 prompt indicates that the keyboard has initialized. This prompt can appear very quickly, so youmust watch for it to display, and then press . If you press before you are prompted, this keystrokewill be lost.4. If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windowsdesktop. Then, shut down your computer and try again.Jumper SettingsTo change a jumper setting, pull the plug off its pin(s) and carefully fit it down onto the pin(s) indicated on the systemboard. The following table displays the system board jumper settings.Table 2. Jumper SettingsJumper Setting DescriptionPSWD Default Password features are enabledRTCRST pin 1 and 2 Real-time clock reset. Can be used for troubleshooting.30
