CPU ConfigurationUSB Controller Enable or disable the USB controller. Default: EnabledUSB Storage Boot Function Enable or disable the option to bootthrough a USB deviceDefault: EnabledPower ManagementRestore AC Power Loss Specifies how the computer willbehave when AC power is restoredafter an AC power loss.Default: Power OffWake on Lan from S4/S5 Allows the computer to be remotelyturned on.Default: EnabledAuto Power On Enable or disable the computer topower on automatically. You canfurther specify the date and time thecomputer can power ON.Default: DisabledPost BehaviourNumLock Key Enable or disable the NumLock Statelight during POST.Default: OnKeyboard Error Report Enable or disable the Keyboard ErrorReport to be displayed during POST.Default: EnabledTable 7. BootSet Boot Priority Specifies the order of different devices in which thecomputer will boot through at start up.Hard Disk Drives Specify which hard drive the computer can boot through.CD/DVD ROM Drives Specify which CD/DVD (optical drives) the computer canboot through.Table 8. SecurityUnlock Setup Status Specifies whether the BIOS can be edited.Admin Password Status Specifies whether an administrator password has beenassigned.System Password Status Specifies whether a system password has been assigned.Admin Password Allows you to change or delete the administratorpassword.ExitThis section allows you to save, discard, and load default settings before exiting from System Setup.Updating the BIOSIt is recommended to update your BIOS (system setup), on replacing the system board or if an update is available. Fornotebooks, ensure that your computer battery is fully charged and connected to a power outlet33