Table 35. Security (continued)Options DescriptionStart Data Wipe This section contains toggle switch which when enabledensures that the BIOS will queue up a data wipe cycle forstorage device(s) connected to the motherboard on the nextreboot.AbsoluteAbsolute This section lets the user enable, disable or permanentlydisable the BIOS module interface of the optional AbsolutePersistence Module service from Absolute Software. Theoptions available are as follows:● Enable Absolute - Enables Absolute Persistence and loadthe firmware Persistence Module● Disable Absolute - Disables Absolute Persistence. Thefirmware Persistence Module is not installed.● Permanently Disable Absolute - Permanently disablesAbsolute Persistence module interface from further use.UEFI Boot Path SecurityUEFI Boot Path Security This section lets the user control whether or not the systemwill prompt the user to enter the admin password(if set) whenbooting to a UEFI booth path device from F12 boot menu. Theoptions available are as below:● Never● Always● Always Except Internal HDD● Always Except Internal HDD&PXEPasswordsThis section provides details on password settings.Table 36. PasswordsOptions DescriptionAdmin Password This field allows the user to set, change, or delete theadministrator password.System Password This field allows the user to set, change, or delete the systempassword.Internal HDD-0 Password This field allows the user to set, change, or delete the HardDrive password.Password ConfiguratorUpper Case Letter Enable or disable reinforced use of upper case letters.Lower Case Letter Enable or disable reinforced use of lower case letters.Digit Enable or disable reinforced use of at least one digit.Special Character Enable or disable reinforced use of at least one specialcharacter.System setup 33