Dell Vostro 3000 Setup And Specifications Manual

Also see for P101F: Setup and specifications guide Service manual

3. Insert the USB flash drive into the system that requires the BIOS update.4. Restart the system and press F12 when the Dell splash logo appears to display the One Time Boot Menu.5. Using arrow keys, select USB Storage Device and click Enter.6. The system will boot to a Diag C:\> prompt.7. Run the file by typing the full filename, for example, O9010A12.exe and press Enter.8. The BIOS Update Utility will load. Follow the instructions on screen.Figure 1. DOS BIOS Update ScreenSystem and setup passwordTable 44. System and setup passwordPassword type DescriptionSystem password Password that you must enter to log on to your system.Setup password Password that you must enter to access and make changes tothe BIOS settings of your computer.You can create a system password and a setup password to secure your computer.CAUTION: The password features provide a basic level of security for the data on your computer.CAUTION: Anyone can access the data stored on your computer if it is not locked and left unattended.NOTE: System and setup password feature is disabled.Assigning a system setup passwordPrerequisitesYou can assign a new System or Admin Password only when the status is in Not Set.About this taskTo enter the system setup, press F2 immediately after a power-on or reboot.System setup 41

/ 43

Related manuals for Dell P101F