Setting Up and Using Your Computer 29NOTE: Most commercial DVDs have copyright protection and cannot be copiedusing Roxio Creator Plus.1 Open Roxio Creator Plus.2 Under the Copy tab, click Disc Copy.3 To copy the CD or DVD:• If you have one CD/DVD drive, ensure that the settings are correct, andthen click Disc Copy. The computer reads your source CD or DVDand copies the data to a temporary folder on your computer harddrive.When prompted, insert a blank CD or DVD into the drive andclick OK.• If you have two CD/DVD drives, select the drive into which you haveinserted your source CD or DVD, and then click Disc Copy. Thecomputer copies the data from the source CD or DVD to the blankCD or DVD.Once you have finished copying the source CD or DVD, the CD or DVDthat you have created automatically ejects.Using Blank CDs and DVDsCD-RW drives can write to CD recording media only (including high-speedCD-RW media), while DVD-writable drives can write to both CD and DVDrecording media.Use blank CD-Rs to record music or permanently store data files. After themaximum storage capacity of a CD-R is reached, you cannot write to thatCD-R again (see the Sonic documentation for more information). Use blankCD-RWs if you plan to erase, rewrite, or update information on the CD later.Blank DVD+/-Rs can be used to permanently store large amounts of data.After you create a DVD+/-R disc, you may not be able to write to that discagain if the disc is finalized or closed during the final stage of the disc creationprocess. Use blank DVD+/-RWs if you plan to erase, rewrite, or updateinformation on the disc later.
