Dell Vostro 410 Service Manual

Also see for Vostro 410: Setup guide User guide Service manual Setup and quick reference guide Documentation update

Contents

Dell Vostro 410 Service Manual Manual pdf 21 page image

4. Disconnect the FlexBay USB cable from the back of the Media Card Reader and from the internal USB connector on the system board (see System BoardComponents).5. Remove the two screws securing the Media Card Reader.6. Slide the Media Card Reader out through the front of the computer.7. If you are not reinstalling the Media Card Reader, replace the drive panel insert (see Replacing the Drive Panel Insert).8. Replace the bezel (see Replacing the Bezel).9. Perform the steps in the procedure After Working on Your Computer.Replacing or Adding a Media Card Reader1. Follow the procedures in Before Working on Your Computer.2. Remove the computer cover (see Removing the Computer Cover).3. Remove the bezel (see Removing the Bezel).4. If you are installing a new Media Card Reader rather than replacing a Media Card Reader, remove the break-away metal plate from the FlexBay (seeRemoving the FlexBay Break-Away Metal Plate).5. Remove the Media Card Reader from its packaging.6. Gently slide the Media Card Reader into the FlexBay slot through the front of the computer.7. Align the screw holes in the Media Card Reader with the screw slots in the FlexBay.8. Install the two screws to secure the Media Card Reader.9. Connect the FlexBay USB cable to the back of the Media Card Reader and to the internal USB connector on the system board (see System BoardComponents).10. Replace the bezel (see Replacing the Bezel).11. Perform the steps in the procedure After Working on Your Computer.Optical DriveNOTE: Ensure that the Media Card Reader is installed before the FlexBay cable is connected.1 screws (2) 2 screw slots (2)3 Media Card Reader 4 USB interface cable