Troubleshooting 159 Close the Main Menu window to exit the Dell Diagnostics and restart thecomputer.Starting the Dell Diagnostics From the Drivers and Utilities DiscBefore running the Dell Diagnostics, enter the system setup program (see"System Setup Program" on page 129) to review your computer’sconfiguration information, and ensure that the device you want to test isdisplayed in the system setup program and is active.1 Insert the Drivers and Utilities disc into the optical drive.2 Restart your computer.3 When the DELL logo appears, press immediately.NOTE: Keyboard failure may result when a key is held down for extendedperiods of time. To avoid possible keyboard failure, press and release ineven intervals to open the Boot Device Menu.If you wait too long and the operating system logo appears, continue towait until you see the Microsoft Windows desktop, and then shut downyour computer and try again.4 When the boot device list appears, use the up- or down- arrow keys tohighlight CD/DVD/CD-RW Drive then press .NOTE: Using the one-time boot menu changes the boot sequence for thecurrent boot only. Upon restart, the computer boots according to the bootsequence specified in the system setup program.5 Press any key to confirm that you want to start from the CD/DVD.If you wait too long and the operating system logo appears, continue towait until you see the Microsoft Windows desktop, and then shut downyour computer and try again.6 Type 1 to Run the 32 Bit Dell Diagnostics.7 At the Dell Diagnostics Menu, type 1 to select Dell 32-bit Diagnostics forResource CD (graphical user interface).8 Press to select Test System and then press .
