Dell W-7030 Installation Manual

Contents

Dell W-7030 Installation Manual Manual pdf 18 page image

10 | Installation Dell Networking W-7030 Controller | Installation GuideTable or Shelf InstallationRequired Tools and Equipment Rubber Feet (included in the package)Installation Steps1. Attach the rubber feet to the bottom of the controller (see Figure 3).Figure 3 Attaching Rubber Feet2. Place the controller in the desired location.Wall MountingThe mounting brackets can also be used for wall mounting the W-7030 controller.Required Tools and EquipmentThe following tools and equipment are required for installing a W-7030 controller on a wall: Mounting Brackets (2x) Screws for mounting bracket (x8): M3 x 6.5 mm Phillips Flat Head Screws Wall Anchors: Optional accessory (not included in the package) Wall Mounting Screws: The type of screw depends on the installation surface (not included in the package) Suitable Screwdrivers for all screw types (not included in the package)Installation StepsTo install a W-7030 controller on a wall:1. Fasten the mounting brackets over the mounting holes on the sides of the W-7030 controller using the eightscrews for mounting bracket (four per bracket) and a suitable screwdriver (see Figure 4).NOTE: Ensure that the Ethernet ports are facing down when installing the W-7030 controller on a wall.