Dell W11C002 Owner's Manual

Also see for OptiPlex 7440 All-In-One W11C: Owner's manual Quick start guide Owner's manual

Option DescriptionBlock Sleep (S3 state)Default setting: This option is disabledIntel Ready Mode This option enables the capability of Intel Ready Mode technology.POST behavior screen optionsOption DescriptionNumlock LED Specifies if the NumLock function can be enabled when the system boots. This option is enabled by default.Keyboard Errors Specifies whether keyboard related errors are reported when it boots. This option is enabled by default.Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:• Minimal• Through (default)• AutoExtended BIOSPOST TimeThis option creates an additional pre-boot delay and allows you to see the POST status messages. The options are:• 0 seconds (default)• 5 seconds• 10 secondsFull screen Logo This option displays the full screen logo if your image match the screen resolution. The option is disabled by default.Warnings andErrorsThis option causes the boot process to only pause when warnings or errors detected. The options are:• Prompt on Warnings and Errors• Continue on Warnings• Continue on Warnings and ErrorsVirtualization support screen optionsOption DescriptionVirtualization Allows you to enable or disable the Intel Virtualization Technology.Enable Intel Virtualization Technology (default).VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities providedby Intel® Virtualization technology for direct I/O.Enable VT for Direct I/O - enabled by default.54 System setup