LCD TV is in a power save mode (in PC mode).The main OSD menu is unlocked.The main OSD menu is locked.Common ProblemsThe following table contains general information about common LCD TV problems you might encounter.COMMONSYMPTOMSWHAT YOU EXPERIENCE POSSIBLE SOLUTIONSNo Video/ Power LEDoffNo picture, LCD TV is dead Check connection integrity at both ends of the video cableElectric outlet verificationEnsure power button depressed fullyNo Video/ Power LEDonNo picture or no brightness Increase brightness & contrast controlsPerform LCD TV self-test feature checkCheck for bent or broken pinsPoor Focus Picture is fuzzy, blurry orghostingPush Auto adjust buttonAdjust Phase and Clock controls via OSDEliminate video extension cablesPerform LCD TV resetLower video resolution or increase font sizeShaky/Jittery Video Wavy picture or fine movement Push Auto Adjust buttonAdjust Phase and Clock controls via OSDPerform LCD TV resetCheck environmental factorsRelocate and test in other roomMissing Pixels LCD screen has spots Cycle power on-offThese are pixels that are permanently off and is a natural defect that occurs in LCDtechnologyStuck-on Pixels LCD screen has bright spots Cycle power on-offThese are pixels that are permanently on and is a natural defect that occurs in LCDtechnologyBrightness Problems Picture too dim or too bright Perform LCD TV resetPush Auto Adjust buttonAdjust brightness & contrast controlsNote: When operating in DVI mode, the contrast adjustment is not available.Geometric Distortion Screen not centered correctly Perform LCD TV reset on "Position Settings Only"Push auto-adjust buttonAdjust the centering controlsEnsure LCD TV is in proper video modeNote: When operating in DVI mode, the positioning adjustments are not available.Horizontal/Vertical Screen has one or more lines Perform LCD TV reset