32 Troubleshooting Your TV Displayw w w . d e l l . c o m | s u p p o r t . d e l l . c o mGeneral ProblemsProblem Possible SolutionPoor picture quality while watching TVand using a device such as a DVDplayer or a VCR1 Check the aspect ratio settings in the OSD. Press the Menubutton on the remote control and select Size. For moreinformation on using the OSD, see "Using the On-ScreenDisplay" on page 23.2 Reconnect the device using the same type of connector. Forexample, if you are using the composite connector on thebottom, try connecting the device to the composite connectoron the side of the TV display. See "About Your TV Display" onpage 5 for the location of the connectors.After you connect the device, change the input source in theOSD. See "Input Select Menu" on page 24 for moreinformation.3 Connect the device using a different connector. For example, ifyou are experiencing the problem using a composite connector,try using the component connector.NOTE: To connect to a different connector, you need theappropriate cables for that connector. See your devicedocumentation for a list of supported connections.After you connect the device, change the input source in theOSD. See "Input Select Menu" on page 24 for moreinformation.4 Reset the original factory defaults. Press Menu on the remotecontrol, select Setup, and then select Factory Reset.5 Adjust the color temperature. Press Menu on the remotecontrol, select Picture, and then select Color Temperature.NOTE: Some set top boxes offer aspect ratio. See your devicedocumentation for more information.
