Dell Wyse 3000 Installation And Setup Manual

Also see for Wyse 3000: Quick start guide

Contents

ThingWorx EMS Setup Guidefor the Dell WYSE 3000Page 2-12. Installation and SetupSetup of the Dell WYSE 3000 with an EMS will first require connecting to the Dell Wyse 3000 from acomputer via Ethernet cable and a local DHCP Server. Please note that this guide was writtenfor a computer running Microsoft Windows.Refer to the Troubleshooting section of this guide for help with frequently asked questions.Login to the Dell Wyse 3000 device1. Connect a monitor, mouse, and keyboardto the device, and power it on.2. After the device automatically logs in,hold down the “shift” key and click Start> Log off. Continue holding the shift keyuntil the system asks you to choose anaccount to login to.3. Choose “Adminstrator”, and log in. Thedefault password is “DellCCCvdi”.4. On the Windows Embedded 7 Desktop,open the “Networking and SharingCenter”, and then go to WindowsFirewall.Disable all Firewalls.