Dell Wyse 3040 Thin Client User Manual

Contents

Figure 11. Sound Settingsa. Move the Output volume slider to adjust the output or speaker volume. Click the Output volume option to enable or disablethe output volume.b. Select the device for sound input from the listed input devices. The default audio input is the Analog input.c. Move the Input Volume slider to adjust the input or Mic volume. Click the Input volume option to enable or disable the inputvolume.d. The Input level meter bar shows the input volume peak level.Power stateWyse 3040 thin client running Wyse ThinLinuxOn your initial configuration, Dell recommends that you connect by using a wired connection by plugging in the network connectedEthernet cable to your thin client.After you turn on your thin client, you are automatically logged in to the thinuser account. By default, the password of the thinuseraccount is set to thinuser.NOTE: In cases where a GDM login is needed (for example, AD/Domain login, the PNAgent login, and so on), theautologin option can be turned off through the GUI or by using the INI.Admin mode enables you to perform system administration tasks such as adding or removing connections and setting up specificdevice settings. To enter into the Admin mode, click the Switch to Admin button from Setting application screen to admin mode andthen enter the default root password in the Password Needed window. The default root password is admin.Configuring connections locally on Wyse ThinLinuxOn the System Settings page, click the Connections icon. The Connections page contains the following tabs:• Citrix• VMware39