Dell Wyse 3040 Thin Client User Manual

Contents

c. Enter the IP address of the DNS server in the DNS Server box.Use of DNS is optional. DNS allows you to specify remote systems by their host names rather than IP addresses. If aspecific IP address (instead of a name) is entered for a connection, it is used to make the connection. Enter the DNSdomain and the network address of an available DNS server. The function of the DNS domain entry is to provide a defaultsuffix to be used in name resolution. The values for these two boxes may be supplied by a DHCP server. If the DHCP serversupplies these values, they replace any locally configured values. If the DHCP server does not supply these values, thelocally configured values will be used.NOTE: You can enter up to 16 DNS server addresses, separated by a semicolon, comma, or space. The firstaddress is for the primary DNS server and the rest are secondary DNS servers or backup DNS servers .d. Enter the IP address of the WINS server in the WINS Server box.Use of WINS is optional. Enter the network address of an available WINS name server. WINS allows you to specify remotesystems by their host names rather than IP addresses. If a specific IP address (instead of a name) is entered for aconnection, it is used to make the connection. These entries can be supplied through DHCP, if DHCP is used. DNS andWINS provide essentially the same function, name resolution. If both DNS and WINS are available, the thin client attemptsto resolve the name using DNS first and then WINS.You can enter two WINS server addresses (primary and secondary), separated by a semicolon, comma, or space.e. Enter the digit multiplier of 30 seconds in the TCP Timeout box to set the time-out value of a TCP connection. The valuemust be 1 or 2 which means the connection time-out value is from 1x30= 30 seconds to 2x30= 60 seconds. If the data forconnecting to the server is not acknowledged and the connection is timed out, setting the time-out period retransmits thesent data and again tries to connect to the server till the connection is established.3. Click OK to save the settings.Configuring the DHCP Options SettingsTo configure the options settings:1. From the desktop menu, click System Setup, and then click Network Setup.The Network Setup dialog box is displayed.2. Click the Options tab, and use the following guidelines:9