Dell XC6320 Owner's Manual
Also see for XC6320: Getting startedWeb-scale hyperconverged appliance solutions guideGetting startedGetting startedGetting started
                                                                                           |
Capacity Specifies the total capacity of the hard drive. This field isundefined for removable media devices such as opticaldrives.Boot Settings detailsThe Boot Settings screen details are explained as follows:Boot Mode Enables you to set the boot mode of the system.CAUTION: Switching the boot mode may prevent the system from booting ifthe operating system is not installed in the same boot mode.If the operating system supports UEFI, you can set this option to UEFI. Setting thisfield to BIOS allows compatibility with non-UEFI operating systems. This option isset to BIOS by default.NOTE: Setting this field to UEFI disables the BIOS Boot Settings menu. Settingthis field to BIOS disables the UEFI Boot Settings menu.Boot SequenceRetryEnables or disables the Boot Sequence Retry feature. If this option is set to Enabledand the system fails to boot, the system reattempts the boot sequence after 30seconds. This option is set to Enabled by default.Hard-Disk Failover Specifies the hard drive that is booted in the event of a hard drive failure. Thedevices are selected in the Hard-Disk Drive Sequence on the Boot Option Settingmenu. When this option is set to Disabled, only the first hard drive in the list isattempted to boot. When this option is set to Enabled, all hard drives are attemptedto boot in the order selected in the Hard-Disk Drive Sequence. This option is notenabled for UEFI Boot Mode.Boot OptionSettingsConfigures the boot sequence and the boot devices.BIOS BootSettingsEnables or disables BIOS boot options.NOTE: This option is enabled only if the boot mode is BIOS.UEFI Boot Settings Enables or disables UEFI Boot options. The Boot options include IPv4 PXE and IPv6PXE. This option is set to IPv4 by default.NOTE: This option is enabled only if the boot mode is UEFI.Network Settings screen detailsThe Network Settings screen details are explained as follows:PXE Device n (n =1 to 4)Enables or disables the device. When enabled, a UEFI boot option is created for thedevice.PXE Device nSettings (n = 1 to4)Enables you to control the configuration of the PXE device.Integrated Devices detailsThe Integrated Devices screen details are explained as follows:27 |
Related manuals for Dell XC6320
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine