Figure 14. Removing and installing a hard drive from the hard drive carrier1. hard drive carrier 2. screw (4)3. hard driveInstalling a hard drive into a hard drive carrierCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat are shipped with your product.Follow the safety guidelines listed in the Safety instructions section.1. Place the hard drive into the hard drive carrier.2. Secure the hard drive to the hard drive carrier with screws.SATADOMImportant information about SATADOMThe SATA Disk‐On‐Motherboard (SATADOM) shipped with XC Series appliances is intended as anappliance boot device.45