Dell XFR D630 Service Manual

Also see for D630 - LATITUDE ATG NOTEBOOK: Quick reference guide User guide User guide Quick reference guide System board manual

Contents

DellTM XFR D630 Fully Rugged Notebook Service ManualPage 66 of 106 Revision A01Location of left and right display grommets6. Install hinge on each side, on top of display panel brackets. Secure each hinge to top coverwith 3 M2.5 X 5-mm screws.NOTE: Hinges are labeled R (right) and L (left) and must be installed on the correct side.7. Install the bezel (see 1 2 5 H Installing the Display Bezel).8. Install the display assembly (see 1 2 6 H Installing the Display Assembly).NOTE: Ensure the display cable grommets are properly installed by following the instructionsprovided at the beginning of 1 2 7 H Installing the Display Assembly.10.7 Removing the Display Top CoverCAUTION: Before working inside your computer, follow the safety instructions in theXFR D630 Product Information Guide and in the XFR D630 User’s Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or byperiodically touching an unpainted metal surface (such as a connector on the back of thecomputer).1. Follow the instructions in 1 2 8 H Before You Begin.2. Remove the display assembly (see 1 2 9 H Removing the Display Assembly).NOTE: Ensure the display cable grommets were removed by following the grommet removalinstructions provided in 1 3 0 H Removing the Display Assembly at step 13.3. Remove the display bezel (see 1 3 1 H Removing the Display Bezel).4. Remove the display panel (see 1 3 2 H Removing the Display Panel).10.8 Installing the Display Top CoverNOTE: If replacing the display top cover, remove the replacement display top cover from itspackaging. The new part will have a mylar covering. The antenna cable will be taped to theinside of the cover. Carefully remove the tape from the antenna cable.