Replacing the mSATA Card | 21Replacing the mSATA CardWARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before You Begin" onpage 7. After working inside your computer, follow the instructions in"After Working Inside Your Computer" on page 9. For additional safety bestpractices information, see the Regulatory Compliance Homepage atdell.com/regulatory_compliance.Procedure1 Align the notch on the mSATA card with the tab on themSATA-card connector.2 Insert the mSATA card at a 45-degree angle into the mSATA-card connector.3 Press the other end of the mSATA card down and replace the screw that securesthe mSATA card to the mSATA-card connector.4 Adhere the mylar to the mSATA card.Postrequisites1 Replace the battery. See "Replacing the Battery" on page 14.2 Replace the base cover. See "Replacing the Base Cover" on page 12.3 Follow the instructions in "After Working Inside Your Computer" on page 9.
