50 | Removing the Camera ModuleRemoving the Camera ModuleWARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before You Begin" onpage 7. After working inside your computer, follow the instructions in"After Working Inside Your Computer" on page 9. For additional safety bestpractices information, see the Regulatory Compliance Homepage atdell.com/regulatory_compliance.Prerequisites1 Remove the base cover. See "Removing the Base Cover" on page 10.2 Remove the battery. See "Removing the Battery" on page 13.3 Remove the display back-cover. See "Removing the Display Back-Cover" onpage 47.Procedure1 Remove the screws that secure the camera module to the display panel.2 Turn the camera module over and disconnect the camera cable from theconnector on the camera module.3 Carefully lift the camera module off the display panel.21 3
