Replacing the solid-state driveWARNING: Before working inside your tablet, read the safetyinformation that shipped with your tablet and follow the steps inBefore working inside your tablet. After working inside your tablet,follow the instructions in After working inside your tablet. For moresafety best practices, see the Regulatory Compliance home page atwww.dell.com/regulatory_compliance.CAUTION: Solid-state drives are fragile. Exercise care when handlingthe hard drive.Procedure1 Slide the solid-state drive into the slot on the system board.2 Align the screw hole on the solid-state drive with the screw hole on theback-cover assembly.3 Replace the screw that secures the solid-state drive to the back-coverassembly.Post-requisitesReplace the battery.17
