Identifier GUID-1CB6AF9C-C07C-4A93-A3CB-758078A2764DVersion 1Status ReleasedInstalling the batteryPrerequisitesIf you are replacing a component, remove the existing component before performing the installation procedure.About this taskThe following image indicates the location of the battery and provides a visual representation of the installation procedure.Steps1. Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.2. Replace the five screws (M1.6x2.5) that secure the battery to the palm-rest and keyboard assembly.3. Connect the battery cable to the system board.Next steps1. Install the base cover.2. Follow the procedure in After working inside your computer.18 Removing and installing components